
Lights usually flicker because of a loose bulb, a dimmer that doesn't match LED bulbs, a large appliance starting up on the same circuit, or a loose connection somewhere in the wiring. One flickering fixture is often a bulb or dimmer issue you can fix yourself. Flickering in several rooms, lights that dim when the AC kicks on, or flickering along with buzzing, warmth or a burning smell point to a wiring, panel or service problem that a licensed electrician should check promptly.
Last updated: November 2026
What causes a single light to flicker?
- A loose bulb: turn off the power, let it cool, and tighten it.
- Dimmer and LED mismatch: older dimmers made for incandescent bulbs often make LEDs flicker. Use LED-compatible dimmers and dimmable bulbs.
- A worn switch or fixture connection, which shows up as flicker when you touch the switch.
Why do lights flicker when the AC or a big appliance turns on?
A brief dip when a large motor starts, like an AC compressor, well pump or vacuum, is common. If it's more than a split second, or lights dim noticeably every time, the circuit may be overloaded, the panel may be undersized, or there may be a loose connection at the panel or service. Antelope Valley and Santa Clarita summers that reach the high 90s°F keep AC compressors cycling all day, which makes this more noticeable. Our guide to tripping breakers covers related overload signs.
When does flickering mean a serious problem?
- Flickering in multiple rooms or the whole house.
- Lights that get brighter and dimmer, which can mean a loose neutral connection.
- Buzzing, crackling, or warm switch plates and outlets.
- A burning smell or scorch marks.
Loose connections create heat, and heat inside walls is a fire risk. The NFPA lists electrical distribution and lighting equipment among the leading causes of home fires. If you see these signs, turn off what you safely can and call an electrician. For the after-hours version, see our emergency electrician service.
Could the problem be on the utility side?
Sometimes. If your neighbors also see flickering, or it happens during wind events, it may be the utility's lines or transformer. Santa Ana winds in fall and winter can cause brief flickers on overhead lines. Report it to your utility (SCE, LADWP, BWP or GWP). If it's only your home, the problem is likely on your side of the meter.
Our electrical troubleshooting and repair service tracks down flicker at the fixture, circuit, panel and service. B&M Electrical Services has 30+ years of experience as a licensed California contractor (C-1098584).
Frequently Asked Questions
Do LED bulbs flicker more than old bulbs?
They can on incompatible dimmers or with low-quality drivers. Matching dimmable LEDs with LED-rated dimmers usually solves it.
Is flickering dangerous?
One bulb, usually not. Whole-house flickering, buzzing or heat should be checked soon, since loose connections can overheat.
Can a bad breaker cause flickering?
Yes. A worn breaker or a loose connection at the panel can cause flicker on that circuit.
Lights flickering around the house? Call Us Today for a Free Estimate at (661) 904-9377 or schedule your service online.